|
Serial Number |
Product Name |
Appearance |
Usage |
Drying Time (minutes) |
Characteristics |
Main Ingredients |
|
JY-6XXX |
STAIN |
Coloured solutions |
For direct colouring of wood |
25℃-10 minutes |
Good colour, good transparency, fast drying, no linting |
DS Masterbatch |
|
JY-7XXX |
NE-STAIN |
Coloured solutions |
For direct colouring of wood |
25℃-10 minutes |
Fresh colour, good weather and light resistance; |
DS Masterbatch |
A.1.FILLER (wood plugging agent)
2.180#~240# sandpaper grinding
3.STAIN
4.NC, PU second degree primer
5.NC, PU second primer
6.NE-STAIN colour correction
7.NC, PU varnish
B.1.STAIN
2.PU, NC two primers
3. Sanding after drying, with 240#~280# sandpaper.
4.NC topcoat or PU topcoat once.
1.JY-5XXX FILLER (wood plugging agent) (spraying or scraping)
2.After drying with 240# sandpaper
3.NE-STAIN (spraying)
4.PU second degree primer (spraying)
5. NE-STAIN (spraying) (Note: At this time, NE-STAIN can also be added to the previous process of PU second degree of primer; can also be added to the next process of PU topcoat, you can eliminate this process)
6.PU matt paint or full glossy surface request (spraying)
1: Stir well before use.
2: The board should avoid pollution and the moisture content should not be higher than 12%.
3: Shelf life is 12 months under normal conditions (stored in a cool, dry and ventilated place).
4: This information is set under our conditions, and is intended to be used as a reference.